🌍
ocds-bidanga-SO-OP00326496
completetender
Procurement of Laboratory Equipment for the Beledweyne Urban Resilience Project — Beledweyne Municipality
Titre original : Procurement of Beledweyne PIU Laboratory Equipment
Deadline
January 5, 2025
Published on December 4, 2024 at 12:00 AMModified on June 20, 2026 at 01:09 AM
Key information
- Type
- Énergie
- Deadline
- January 5, 2025 at 12:00 AMClosed
- Estimated Value
- Not disclosed
- Language of Notice
- English
Description
OFFICE OF THE MAYOR, BELEDWEYNE MUNICIPALITY
HIRSHABELLE FEDERAL MEMBER STATE OF SOMALIA
SOMALIA URBAN RESILIENCE PROJECT PHASE TWO-SURP-II (NAGAAD)
SPECIFIC PROCUREMENT NOTICE (SPN)
Request for Bids
Goods
(One-Envelope Bidding Process)
Country: Federal Republic of Somalia
Name of Project: Somalia Urban Resilience Project II (SURPII)
Contract Title: Materials Testing Laboratory Equipment
Project ID.: P170922
Grant No.: TF-B8532
RFB Reference No: SO-BW-457615-GO-RFB
- The Federal Government of Somalia through the Ministry of Finance has received financing from the World Bank toward the cost of Somalia Urban Resilience Project II (SURPII) and intends to apply part of the proceeds toward payments under the Contract for Procurement of Materials Testing Laboratory Equipment (Soil and Concrete, and Asphalt Testing Equipment).
For this contract, the Borrower shall process the payments using the Direct Payment disbursement method, as defined in the World Bank’s Disbursement Guidelines for Investment Project Financing, except for those payments, which the contract provides to be made through letter of credit.
- The Beledweyne Municipality now invites sealed Bids from eligible Bidders for Procurement of the following set of equipment:
Lot A: Soil and Concrete Equipment
| Item No: | Brief Description | Quantities | Delivery Period (From date of contract signature) |
|---|---|---|---|
| 1 | General Equipment(AASHTO T99 & T180 – or equivalent) | 82 No | 45 days |
| 2 | Atterberg Limits | 14 No | 3 |
| Compaction Equipment (AASHTO T99 & T180 – or equivalent) | 24 No | 4 | Density Equipment (Sand Replacement method BS 1377 – or equivalent) |
| 66 No | 5 | CBR Equipment (AASHTO T193 – or equivalent) | 206 No |
| 6 | Specific Gravity Equipment for Aggregates (BS 812 – or equivalent) | 26 No | 7 |
| Flakiness Analysis Equipment (BS 812 – or equivalent) | 7 No | 8 | Sieve Analysis Equipment |
| 20 No | 9 | Concrete: Slump and Cube Manufacture (BS 1881– or equivalent) Equipment | 42 Sets/No |
| 10 | Concrete: Cube Compression Testing | 2 No | 11 |
| Aggregate and Chippings Testing Equipment | 66 Sets/No | 12 | Tray Spray and Spread Rate Tests Equipment |
| 6 No | 13 | Miscellaneous Items (VII under Specification, Page89) | 305 Assorted |
| 14 | Standard Specifications (Copies of each of the latest editions of the following Standard) | 10 Copies | 15 |
| Consumables (VII under Specification, Page89) | 1,685 AssortedLot B: Asphalt Testing Equipment |
No
| Item Description | Technical Specification | Quantities | Delivery Period (From date of contract signature) |
|---|---|---|---|
| 1 | Marshall Test (ASTM D1559) | Specimen mould + base plate + extension collar. Diameter 101.6mm | 6NO |
45 days
| 2 | Marshall Test (ASTM D1559) | Marshall Automatic Compaction hammer Floor type structure. Composed of mechanical hammer and electronic control box. Digital display control. Equip with a manual lifting rod, easy to operate. (Auto lifting is optional TBTMJS-0702A-1) Hammer weight(small) 4536g±9g Falling of Hammer 457mm±1.5mm Mould(small) D101.6mm Compaction speed (60±5)times/min Compaction time (0～999)times Power supply 220VAC 50HZ (60HZ optional) Dimension 1740mm×540mm×540mm Weight Around 180kg. | 1NO |
|---|---|---|---|
| 3 | Marshall Test (ASTM D1559) | Compaction pedestal + specimen mould holder. Rammer weight 4.535kg, drop height 457± 1.5mm | 1NO |
| 4 | Marshall Test (ASTM D1559) | Breaking head mould | 1NO |
| 5 | Marshall Test (ASTM D1559) | Electrical 30kN Marshall Stability compression testing machine. (Max. Capacity 30kN or 50kN, Loading speed 50±5mm/min, Micrometer 0-10mm, accuracy 0.01mm Power supply 220VAC 50HZMotor capacity 550W) | 1NO |
| 6 | Marshall Test (ASTM D1559) | Suitable electrically operated laboratory AC mixer, 10 litre capacity | 1 No |
| 7 | Marshall Test (ASTM D1559) | Bowl for manual mixing 8-10 litre capacity | 1NO |
| 8 | Marshall Test (ASTM D1559) | Proving ring 28kN capacity graduated in 0.0025mm | 1NO |
| 9 | Marshall Test (ASTM D1559) | Flowmeter with deformation units of 0.25mm | 2NO |
| 10 | Marshall Test (ASTM D1559) | Water bath at least 150mm deep thermostatically controlled to maintain water at 60oC ± 1oC with a perforated false bottom or equipped with a shelf to support specimen 50mm above the bottom of the bath, with cover Temp. range RT - 100 degreeTemp. accuracy 0.1degreeHeating power 1kWEffective room 480 x 330 x 220mm (35L) Power supply 220VAC 50Hz | 1NO |
| 11 | Marshall Test (ASTM D1559) | Thermometer (50oC to 250oC) 50mm diameter with 180mm stainless steel stem | 2NO |
| 12 | Marshall Test (ASTM D1559) | 200mm x 200mm x 50mm deep steel baking trays | 10NO |
| 13 | Marshall Test (ASTM D1559) | Gloves for handling hot material, heat resistant level 200℃ and 20 seconds before burnt. | 20Pair |
| 14 | Bitumen Extraction Test (Cold extraction Bottle Roller Method, BS 598:102) | Centrifuge extractor to BS 598 complete with accessories (1500 grams) (Rated rotation speed 1300~3000r/minPower supply 220VAC 50HZ/ 60HZ (optional) Volume 1500~3000gAmbient temperature 10℃ ～35℃Relative humidity ≤85% Net weight Around 40KGDimension Around 600mm×445mm×620mm) | 1NO |
| 15 | Bitumen Extraction Test (Cold extraction Bottle Roller Method, BS 598:102) | Bitumen Recovery still for Dichloromethane | 1NO |
| 16 | Bitumen Extraction Test (Cold extraction Bottle Roller Method, BS 598:102) | Trichloroethylene (Drum of 200kg) | 1No. |
| 17 | Maximum S.G of Bituminous Mixtures (ASHTM D2041) | Balance of sufficient capacity and sensitivity to enable maximum specific gravity of samples of uncompacted paving mixtures to be calculated to at least four significant figures, it shall be equipped with a suitable suspension apparatus to permit weighing in water. | 1NO |
| 18 | Maximum S.G of Bituminous Mixtures (ASHTM D2041) | Vacuum pump complete with accessories. Power 3/4 HP Inlet Port 1/4” & 3/8” FlareOil Capacity 700 mlDimensions (mm) 400*145*270Weight 16.5 kg | 1NO |
| 19 | Maximum S.G of Bituminous Mixtures (ASHTM D2041) | Glass or metal container of at least 1,000ml capacity it shall be sufficiently strong to withstand a partial vacuum, it shall have a cover fitted with a rubber gasket and a hose connection. Fine wire mesh shall cover the hose opening to prevent loss of fines. | 1NO |
| 20 | Electric vibrating Kango Hammer | Electric vibrating Kango Hammer fitted with steel tamper (BS 1377) complete with support frame, 6 moulds and 3 base plates. Power supply: 230V 1ph 50-60Hz 720WDimensions: 105x430x270 mmWeight: 6 kg approx. | 1NO |
| 21 | Petrol Driven Core cutting machine | Petrol driven core cutting machine with all accessories including 100mm and 150mm dia drill bits | 1NO |
| 22 | Installation and Calibration | Installation and calibration (Calibration to be done after installation) | 1NO• Bidders may Bid for one or both Lots. Bidders must quote all Items in the Bid or Bids they are bidding for. Bids not quoting all Items in a Lot will be considered non-responsive and rejected. Bids will be evaluated, and contracts awarded on a Lot-by-Lot basis. Bidders wishing to offer discounts in case they are awarded more than one contract will be allowed to do so, provided those discounts are included in the Letter of Bid.• Bidding will be conducted through open national competitive procurement using a Request for Bids (RFB) as specified in the World Bank’s “Procurement Regulations for IPF Borrowers” dated July 2016, revised November 2017, August 2018, November 2020 and updated September 2023 (“Procurement Regulations”), and is open to all Bidders as defined in the Procurement Regulations.• Interested eligible Bidders may obtain further information from PIU Office, Beledweyne Municipality, Email address: [email protected] and inspect the bidding document during office hours 0900 to 1500 hours Mogadishu local time from Saturday to Thursday exclusive of public holidays.• Bids must be delivered to the address below on or before Sunday, 5th January 2025, at 10.00 a.m. Mogadishu time. Electronic Bidding will be permitted. Late Bids will be rejected. Bids will be publicly opened in the presence of the Bidders’ designated representatives and anyone who chooses to attend at the address below on Sunday,5th January 2025, at 10.30 hours Mogadishu time.• All Bids must be accompanied by a BID-SECURING DECLARATION using the form included in Section IV, Bidding Forms.• “Attention is drawn to the Procurement Regulations requiring the Borrower to disclose information on the successful bidder’s beneficial ownership, as part of the Contract Award Notice, using the Beneficial Ownership Disclosure Form as included in the bidding document.”]• The address(es) referred to above is:Acting PIU Project Coordinator,PIU Office,Beledweyne Municipality,Main Street, Hawo-Tako, Beledweyne,Hirshabelle State of Somalia,Federal Republic of Somalia.Email: [email protected] |
Tender Timeline
Publication
December 4, 2024
Bid Submission Deadline
January 5, 2025
Evaluation & Award
Pending
Contract Signature
Pending
Tender Documents
Connectez-vous pour télécharger le dossier et être averti automatiquement de toute modification de cet appel d'offres.